Shock Rear

Shock Rear

After you have a good experience with the Car Ready to Run "remote control, then use the remote control fast clean electric car or commonly called "Car Kit Remote Control Pro. This type of remote control car is designed for professional drivers and the person who has good driving skills. Normally, the standard package for this car remote control are key components for the chassis and Just assemble the ingredients most comprehensive IT main frame. To build the car remote control by your self is not easy it usually takes about 4 to 5 hours.

Advantage of this kit Pro are:
1. Any selection of car accessories Remote hand, you can choose from several types and manufacturers for your car remotely.
2. You will better understand the rapid construction of remote control cars electric. To understand the construction is important during maintenance or when you need to replace the parts in case of breakage or wear.

To build, you need a set of tools to help you. Tools such as screwdrivers (small and medium size) for nut, Hobby, side-cutting knife, scissors, long nose pliers, glue dries faster and the stirrup. (for measuring length tensor) are not included in the package. Other tools they need to quickly build electric cars, remote control, as an Allen wrench of different sizes, wrench key cross and tensioner wire provided in this package. (It is possible that the difference of each manufacturer of remote control cars)

Account before starting build control remote fast electric cars.
1. Understand the guidelines. "Instruction Reading and understanding instructions carefully follow the figure.
2. Fulfills its mission to the area clean and orderly "The kit contains a small piece, probably the loss of parts automobile is high in the area scattered.
3. Cut the molded part would like to meet to avoid the section Mixed other parts of the component car kit comes with a set of several pieces of molded plastic, each set usually represent each section Car remote control and comes with all the numbers game.
4. Remove the plastic burrs after cutting access or Part Tree - It is necessary when you assemble front and rear shock. Access or smudged plastic prevent the collision of functioning.
5. When you mount the end of the ball or the ball into a cup of tourniquet, make - secure end to end length is to strictly follow the relevant length in the instructions - These parties meet in the critical section of your car.
6. Pay attention to unused parts and pieces of the option - Package comes with the use, not used and the alternative.
7. After assembling the whole process, check all bolts and locking nut fairly tight, but not tighter.

Once completed, you need other equipment such as transmitter, servo, receiver, speed control of electric motor, battery (7.2 V to 6 cells), battery charger, tire rubber tires and inserts Body painted. To align your perfect car is recommended in your car than the toe angle, the angle of the camber, ride height and etc.

Article was base on author's experience and knowledge in rc car world, would like to share his knowledge and tips.
If you would like to learn and to know more, go to Fast Electric RC Cars

Have you recharge a motorcycle rear shock to replace the oil?

I took my bike to the store to the rear shock rebuilt. The oil is replaced, but has yet to say anything about charging.

Some but not all shock absorbers are gas filled with an inert gas to maintain the oil bubble. Laden gas is not the same as being a plane crash in which air is added to increase the rate of spring. If the gas has been indicted and had to reload to get the job done. And then he can be accused of gas start.

(Part 1)Rebuild YAMAHA WR200 Rear Shock(OEM)www.teamhklracing.com